Subassembly, labeling, purchased hardware, inspection and packaging can be defined to simplify installation.
- From prototype to production · Built for demanding engineering teams
── Industrial Equipment
BAOSONG manufactures custom aluminum machine frames, equipment enclosures, precision tooling and structural assemblies for automation, inspection, packaging, material handling and factory operations.
── Industrial equipment manufacturing
Equipment structures must carry real loads while protecting alignment, service access, guarding, utilities and the interfaces used by controls, motion systems and process tooling.
We begin with the machine layout and functional datums, then connect extrusion, CNC machining, fabrication, finishing and assembly around the finished equipment—not just a cut list.
── High-value aluminum product focus
These product families create the most value when profile geometry, precision interfaces, load paths and installation details are planned as one manufacturing system.
MACHINE FRAMES & ENCLOSURES
Automation machine frames
Custom profile or fabricated structures for assembly, processing, inspection and test equipment.
Equipment enclosures and machine guards
Frames, panels, doors and access provisions coordinated around safety, service and controls integration.
Machine bases and equipment skids
Load-bearing structures with machined interfaces, leveling points and defined equipment mounting locations.
CONVEYORS & WORKSTATIONS
Conveyor support structures
Frames for belt, roller, chain and transfer systems with sensor, guard and drive mounting provisions.
Assembly and inspection workstations
Ergonomic profile structures with work surfaces, lighting, utility and storage interfaces.
Transfer modules and line-side equipment
Machined plates, rail supports, guides and modular structures for production-line integration.
PRECISION TOOLING & FIXTURES
Tooling plates and fixture bases
Precision-machined aluminum plates with controlled flatness, hole patterns and reference features.
Inspection fixtures and test nests
Workholding structures, locating components and gauge interfaces designed around the measurement plan.
Alignment brackets and motion supports
Machined components that establish the position of rails, sensors, actuators and process tooling.
STRUCTURAL & FACTORY ASSEMBLIES
Robot-cell and automation structures
Machine-cell frames, guarding systems, equipment stands and end-of-line support hardware.
Clean booths and partition frames
Modular structures for controlled work areas, panels, service openings and facility interfaces.
Maintenance platforms and material racks
Service structures, equipment access frames and production-support assemblies manufactured to drawing.
── What buyers need from the structure
LOAD
Frame span, payload, center of gravity, dynamic loads and allowable deflection guide section and joint selection.
DATUM
Machined mounting faces, hole patterns, rail supports and equipment datums are controlled around assembly function.
ACCESS
Doors, guards, panels, cable paths, maintenance zones and changeover access are built into the structure plan.
DELIVERY
Subassembly, labeling, purchased hardware, inspection and packaging can be defined to simplify installation.
── Industrial equipment manufacturing
See the machine structures, precision fixtures, integration details and finished equipment behind a reliable industrial production line.
01 / FINISHED PRODUCT SURFACE
Automation cells, machine frames and production equipment prepared for stable operation and integration.
02 / FINISH TEXTURE CLOSE-UP
Precision aluminum frame joints, base structures and rail supports engineered around load and access.
03 / COLOUR OR SHEEN REFERENCE
Machined fixture plates and inspection nests that establish repeatable datums for production.
04 / QUALITY EVIDENCE
Integrated panels, cable paths and functional interfaces prepared for installation on the production floor.
── From layout to production structure
We translate the equipment layout into a controlled manufacturing route, identifying which members carry load, which interfaces require machining and which dimensions determine installation success.
DFM and structural review
Review spans, loads, profiles, connections, weld access, panels, service zones and equipment interfaces.
Datum-driven machining
Plan machining and fixtures around the faces, holes, rail locations and reference geometry used during integration.
Assembly-aware inspection
Verify overall geometry, flatness, hole position, diagonals and interface relationships against the approved plan.
── Material and section selection
Profile size alone does not determine performance. Alloy, temper, section geometry, joint design, machining allowance, surface finish and the complete load path must be reviewed together.
6063 series
Commonly considered for extruded profiles, guarding, workstations and equipment structures where profile complexity and finish matter.
6061 series
Frequently selected for higher-load brackets, bases, plates and components requiring stronger machined interfaces.
Stress-relieved plate
Selected when large-area machining and dimensional stability are more important than maximum material strength.
Project-specific alloys
High-strength and elevated-temperature alloys require application-specific review of exposure, corrosion, joining and qualification needs.
Section guidance: Nominal profile families such as 20, 30, 40, 45, 60 and 80 series are only a starting point. Final selection should be based on span, connection stiffness, payload, dynamic loading and allowable deflection—not a generic light/medium/heavy label.
── A faster engineering review
01
Overall dimensions, process area, access zones and installation constraints.
02
Static and dynamic loads, support points, center of gravity and allowable deflection.
03
Machine datums, rail positions, tooling mounts, utilities, panels and guarding.
04
Finish, purchased hardware, assembly level, inspection records, quantity and packaging.
CASE STUDY / APLICATION IMAGE
Completed vessel component, offshore structure or installed equipment system
── Structure in context
BAOSONG combines stable geometry, precision-machined interfaces and defined assembly work so equipment frames arrive ready for reliable production-floor integration.
── Typical applications
01
Machine frames, robot cells, guarding, workstations and transfer structures.
02
Precision bases, tooling plates, fixtures, sensor mounts and measurement stations.
03
Conveyor supports, guides, equipment frames, line-side modules and enclosures.
04
Clean booths, service platforms, partitions, maintenance frames and material racks.
── FAQ
The right choice depends on load, span, stiffness, connection design, machining, finish and environment. 6063 is commonly considered for modular extruded structures, while 6061 is frequently used for machined and higher-load components. Large precision bases may benefit from stress-relieved tooling plate.
Yes, when the assembly scope is clearly defined. We can coordinate extrusion, cutting, CNC machining, fabrication, surface finishing, purchased hardware installation and defined assembly work according to the approved drawing and quality plan.
The control method depends on the frame design. We establish functional datums, machining and assembly fixtures, measurement points and acceptance limits around the interfaces used by the finished equipment.
Provide a 3D model or drawing, overall envelope, loads and support points, allowable deflection, critical interfaces, guarding and access requirements, finish, quantities, assembly scope and inspection expectations.
── Start your industrial equipment project
Share the equipment model, loads, support points, critical interfaces, guarding and access requirements, finish, assembly scope and production quantity.
Precision Manufacturing
Beyond Expectations.
Manufacturing insight, straight to your inbox.