Protect threads, grounding zones and close-fit surfaces where required.
- From prototype to production · Built for demanding engineering teams
── ALUMINUM ANODIZING
BAOSONG anodizing services support aluminum components that need improved corrosion resistance, stable appearance and a finish integrated with the part’s material and geometry.
── Finish engineering
Anodizing grows a controlled oxide layer from the aluminum itself. The result depends on alloy, machining marks, pre-treatment, part geometry, colour target and the way the finished part will be handled.
We help define the finish around visible zones, threaded or mating interfaces, masking requirements and the environmental conditions the component will see in service.
── Service scope
An aluminum-specific finish for corrosion resistance, controlled appearance and functional surfaces across machined and extruded components.
01
Preserve a clean aluminum appearance with enhanced surface protection.
02
Apply controlled visual identity to visible aluminum components.
03
Protect threads, grounding zones and close-fit surfaces where required.
04
Align machining, preparation and inspection around the specified anodized result.
── Project gallery
Four prepared image positions for complete products, close-up texture, colour reference and quality verification.
01 / FINISHED PRODUCT SURFACE
finished part or installed equipment detail
02 / FINISH TEXTURE CLOSE-UP
surface grain, coating or anodized detail
03 / COLOUR OR SHEEN REFERENCE
approved colour, gloss or cosmetic comparison
04 / QUALITY EVIDENCE
thickness, coverage or visual inspection
── Production method
Good anodizing begins before the tank. We align alloy, surface preparation, colour, sealing and interface requirements with the part’s final function.
Specification review
Review aluminum alloy, cosmetic surfaces, thread and fit areas, colour consistency requirements and masking needs.
Preparation strategy
Plan pre-treatment, anodize type, colour, sealing and post-finish handling around the part geometry.
Acceptance criteria
Confirm appearance, coverage, colour target and critical dimensions or interfaces after finish.
CASE STUDY / APLICATION IMAGE
finished product in final environment
── Application story
Use this area for an installed profile, housing or front panel that demonstrates the approved anodized colour, texture and working environment.
── Typical applications
── FAQ
Many aluminum alloys can be anodized, though the final colour and appearance vary by alloy and prior surface condition.
Usually, yes. Critical machining is commonly completed first, with masking or controlled post-finish work evaluated where needed.
It can. Threads, bores, grounding zones and close-fit surfaces should be identified during finish planning.
── Start your finishing project
Send the part material, required appearance, operating environment and any drawing or sample reference.
Precision Manufacturing
Beyond Expectations.
Manufacturing insight, straight to your inbox.