Frequently considered for formed sheet components, decorative panels and protective covers where formability and corrosion resistance matter.
- From prototype to production · Built for demanding engineering teams
── Architecture & Construction
BAOSONG manufactures custom aluminum profiles, structural hardware, façade components and finished sections for construction projects—bringing profile development, machining, fabrication and surface finishing into one coordinated supply route.
── MManufacturing for built environments
In a building system, a profile must do more than look right. It may carry glass, drain water, receive gaskets, manage thermal breaks, locate fasteners, support panels or create a continuous finished line.
We align profile geometry, alloy, fabrication, visible finish, packing and installation interfaces around the system that will be assembled on site.
── High-value aluminum product focus
Product families selected for the engineering and visual requirements of contemporary building systems: controlled geometry, robust interfaces, durable finishes and installation-ready delivery.
WINDOW, DOOR & CURTAIN-WALL SYSTEMS
Window and door profile systems
Custom extruded sections for opening, sliding and thermally separated systems, produced to the project’s profile and finish requirements.
Curtain-wall mullions and transoms
Structural profile members, pressure plates, covers and machined connection features for façade assemblies.
Glazing and connection hardware
Machined adapters, brackets, interface plates and support hardware prepared for controlled installation.
CONSTRUCTION STRUCTURES
Formwork and modular construction hardware
Profile sections, connection members, brackets and fabricated parts for reusable construction and site-support systems.
Access, scaffolding and truss components
Lightweight structural members, rails, platforms and connection hardware developed around customer-defined loads and usage.
Canopies, skylights and support frames
Aluminum structures, glazing supports and finished framing components for entrances, walkways and overhead features.
FAÇADE & ARCHITECTURAL FINISHES
Façade panels, trim and cladding interfaces
Aluminum support sections, edge details, panel framing and attachment hardware for exterior architectural systems.
Grilles, louvers and shading profiles
Custom blades, screens and louver sections that balance solar control, airflow, privacy and architectural expression.
Ceilings, partitions and interior trims
Profiles for interior framing, suspended systems, decorative lines, edge details and modular finish components.
BUILDING SERVICES & SITE HARDWARE
Railings, balustrades and handrail systems
Profile-based rails, posts, covers and machined connection components for circulation and edge-protection systems.
Cable routing and equipment supports
Aluminum cable-management sections, equipment frames, brackets and serviceable mounting structures.
Solar, ventilation and exterior accessories
Mounting profiles, ventilation grilles, sunshades and protective structures for building-integrated systems.
── Architecture and construction gallery
From completed façades to profile interfaces and installation checks, each image shows how aluminum components perform in the finished building system.
01 / Marchitecture-gallery-building
Facade, window system, access structure or architectural installation
02 / Architecture-profile
Extruded geometry, thermal break, glazing interface or connection feature
03 / Architecture finish
Facade panel, louver, trim, rail or completed visible surface
04 / Architecture-installation
Fabrication, assembly, fit-up or dimensional inspection detail
── Design and production planning
We evaluate the profile and associated hardware as part of the complete assembly: glass or panel interfaces, drainage, fixing strategy, visible finish, cut lengths, packing, on-site sequence and production scale.
Profile and interface review
Review walls, hollows, radii, fastener features, gasket lands, drainage and downstream machining access before tooling release.
Finish and appearance control
Align alloy, surface preparation, anodizing or coating requirement, visible face protection and approved color or texture standards.
Installation-aware supply planning
Plan cut, drill, machining, fabrication, labelling and packing around the way components are received and assembled on site.
── Material and finish route
Final material, temper, surface treatment and structural validation are governed by the project drawing, code requirements, exposure conditions and the system designer’s specification.
6063 series
Commonly considered for many extruded window, door, façade and visible profile systems where shape detail and surface quality are important.
6061 series
Often evaluated for machined brackets, connections and higher-load structural components where the approved design requires its properties.
5052 series
Frequently considered for formed sheet components, decorative panels and protective covers where formability and corrosion resistance matter.
Project-specific
Anodizing, powder coating, fluoropolymer coating, sealing, color and weathering requirements are confirmed against the customer’s approved specification.
architecture-profile
── From profile to place
BAOSONG coordinates profile production, machining, fabrication and visible finish so the aluminum components arrive prepared for the interfaces, handling and installation sequence of the completed project.
── Typical applications
01
Profiles, glazing interfaces, curtain-wall members and architectural connection hardware.
02
Formwork, trusses, scaffolding components, canopies and support structures.
03
Ceilings, partitions, rails, cable routing and equipment-support hardware.
04
Lightweight frames, rails, handles, joints and equipment support assemblies.
── FAQ
6063 is commonly considered for many architectural profiles because it supports complex extrusion shapes and finished surfaces. Structural and project-specific components may require different alloys, tempers, calculations and approvals. The project specification controls final selection.
We can coordinate profile production, CNC machining, fabrication, anodizing, powder coating and defined assembly work. The scope is confirmed against the drawings, finish standard, installation interfaces and required project documentation.
We agree the visible faces, alloy, finish process, color or texture standard, protective handling and packaging requirement before production. Approved samples and the project’s acceptance criteria guide final inspection.
Send profile drawings or 3D models, wall thickness, alloy and temper requirements, finish and color standard, critical interfaces, quantities, packing requirements, installation context and applicable project standards.
── Start your architectural aluminum project
Share profiles or drawings, material and finish requirements, visible surfaces, interfaces, quantities, installation sequence and required documentation.
Precision Manufacturing
Beyond Expectations.
Manufacturing insight, straight to your inbox.